Quality certificates
Technical specifications are only valid for those products classified as first choice. Consequently, any failure to conform to such standards with respect to all other commercial types shall not be considered as grounds for complaint.
ARCANA CERAMICA S.A. does not accept any claim of responsibility for tiles that have not been fixed and/or maintained following the manufacturer’s recommendations.
Product with very low water absorption, high mechanical performance, chemical and frost resistance. It is suitable whether for using on interior or exterior floors of residential and commercial buildings. Special pieces normally employed are skirting tile, staircase step and gradone.
| Resistance to surface abrasion (glazed tiles) | To enquire according to the styles | UNE EN ISO 10545 Part 7 | |||
| Lineal thermic dilatation | < 9*10 -6 / º C | UNE EN ISO 10545 Part 8 | |||
| Thermic impact resistance | It stands the test | UNE EN ISO 10545 Part 9 | |||
| Cracking resistance | It stands the test | UNE EN ISO 10545 Part 11 | |||
| Surface scratch resistance (Mohs scale) | Minimum 4 | UNE EN 67-101 | |||
| Frost resistance | It stands the test | UNE EN ISO 10545 Part 12 | |||
| Chemical features | |||||
| Chemical resistance | |||||
| -Domestic cleaning products | Type GA | UNE EN ISO 10545 Part 13 | |||
| -Swimming pool salt | Type GA | ||||
| -Acids and bases (low concentration) | Minimum Type GLB | ||||
| Stains resistance | Minimum Type 4 | UNE EN ISO 10545 Part 14 | |||
Product with very low water absorption, high mechanical performance, chemical and frost resistance. It is suitable whether for using on interior or exterior floors of residential and commercial buildings. Special pieces normally employed are skirting tile, staircase step and gradone.
| Technical data | ||||||||
| Manufacture process | Single-firing | UNE-EN 14411 | ||||||
| Physical data | ||||||||
| Size | 33,3x100 cm (13.1x39.4 in) 32x99 cm (12.6x39 in) | 25x75 cm (9.8x29.5 in) | 20x50 cm (7.9x19.7 in) | 27x41,5 cm (10.6x16.3 in) | 20x40 cm (7.9x15.7 in) | 23x33,5 cm (9.1x13.2 in) | 20x20 cm (7.9x7.9 in) | |
| Thickness(mm.) | 11 | 10,5 | 11 | 10 | 9,2 | 9,1 | 7,6 | |
| Length, width, thickness, side straightness, orthogonality, flatness | Conforms to the requisites applicable to each model as defined in standard UNE·EN 14411 for Group BIII | UNE EN ISO 10545 Part 2 | ||||||
| Water absorption | E> 10 % | UNE EN ISO 10545 Part 3 | ||||||
| Flexion resistance N/sq. mm. and breaking strength | > 15 > 600 | UNE EN ISO 10545 Part 4 | ||||||
| Lineal thermic dilatation | < 7*10 -6 / º C | UNE EN ISO 10545 Part 8 | ||||||
| Thermic impact resistance | It stands the test | UNE EN ISO 10545 Part 9 | ||||||
| Cracking resistance | It stands the test | UNE EN ISO 10545 Part 11 | ||||||
| Surface scratch resistance (Mohs scale) | Minimum 3 | UNE EN 67-101 | ||||||
| Chemical features | ||||||||
| Chemical resistance | ||||||||
| -Domestic cleaning products | Type GA | UNE EN ISO 10545 Part 13 | ||||||
| -Swimming pool salt | Type GA | |||||||
| -Acids and bases (low concentration) | Minimum Type GLB | |||||||
| Stains resistance | Minimum Type 4 | UNE EN ISO 10545 Part 14 | ||||||
“Gres” floor tiles is the most common name for dry pressed, glazed ceramic floor tiles with low or medium-low water absorption manufactured by single firing. It is suitable whether for using on interior or exterior floors of residential and commercial buildings. Complementary pieces usually include inserts, triangles, skirting tiles, staircase step and borders.
| Technical data | ||||||
| Manufacture process | Single-firing | UNE-EN 14411 | ||||
| Physical data | ||||||
| Sizes | 20x20 cm. (7,9x7,9 in) | 31,6x31,6 cm. (12,4x12,4 in) | 41x41 cm. (16,1x16,1 in) | |||
| Thickness (mm) | 8 | 9 | 10 | |||
| Length, width, thickness, side straightness, orthogonality, flatness | Conforms to the requisites applicable to each model as defined in standard UNE·EN 14411 for Group BI-b | UNE EN ISO 10545 Part 2 | ||||
| Water absorption | E< 3 % | UNE EN ISO 10545 Part 3 | ||||
| Flexion resistance N/sq. mm. and breaking strength | > 30 > 1100 | UNE EN ISO 10545 Part 4 | ||||
| Resistance to surface abrasion (glazed tiles) | To enquire according to the styles | UNE EN ISO 10545 Part 7 | ||||
| Lineal thermic dilatation | < 7*10 -6 / º C | UNE EN ISO 10545 Part 8 | ||||
| Thermic impact resistance | It stands the test | UNE EN ISO 10545 Part 9 | ||||
| Expansion due to moisture | It stands the test | |||||
| Cracking resistance | It stands the test | UNE EN ISO 10545 Part 11 | ||||
| Surface scratch resistance (Mohs scale) | Minimum 4 | UNE EN 67-101 | ||||
| Chemical features | ||||||
| Chemical resistance | ||||||
| -Domestic cleaning products | Type GA | UNE EN ISO 10545 Part 13 | ||||
| -Swimming pool salt | Type GA | |||||
| -Acids and bases (low concentration) | Minimum Type GLB | |||||
| Stains resistance | Minimum Type 4 | UNE EN ISO 10545 Part 14 | ||||
Declaration of performance CE
ISO Certificates
